Now you too can "bend light". The Electrotwister provides safe, cool, flexible accent lighting for any Xbox 360 mod installation.

Safely route the light around corners to trace major components, or use as an under-glow or other indirect lighting. The Electrotwister is cool to the touch and can fit almost anywhere!

Features
No Soldering requiered, just open your Xbox360 and plug the electrotwister inverter with the Y power cable included.
(technical instructions can be found at talismoon website)
Simply cover the parts of wire you don't want people to see glowing with electrical tape or heat shrink tubing.
If you want to finish your installation the electrotwister can be cut with a scissor where you choose, you just need to end the cut properly.
(Covering the cut with some electrical tape should be enough)
The electrotwister can be fixed into place with non-conductive tape or a drop of epoxy.
(Super glue is NOT recommended, it can damage the electrotwister wire)

This product Includes:
1.5m of glowing cable (2mm diameter)
1 5v inverter
1 Y Power cable

Please be aware that this is a CASE MOD product!
The product itself is very simple to install but you have to first open your XBOX 360 (which voids the warranty) and requires technical knowledge and special tools not included with this product.

NOTE: This product feature a very small power inverter. Depending on where you install this part and how you fix it to the Xbox 360 chassis a high frequency sound could be heard, if you can heard this sound above the operating noise of your console, check the inverter is fixed properly. (Some people hearing are more sensible to high frequency sounds, if this noise still annoy you, consider installing appropriate sound dampening around the inverter)